The Hydro-Temp Georgia Controls Atlanta Series Controller.
As of mid November 2007 all
systems that require a zone control board have been fitted with the Georgia Controls
zone board. (AKA Red board
)
Below is the GC_Controller_Manual.pdf file which
is a 23 page information packet designed to show how to program, wire and service the
controller.
The PDA software pac.zip includes the software that is needed to
be installed on your PDA to communicate and change settings on the controller.
If you are upgrading from an older version of firmware please read the
what's new information by clicking here.
GC_Controller_Manual.pdf <-- 620 kb - Updated 03-23-2010
PDA Software pac.zip<--350 kb - Updated 03-19-2012
| Control board firmware version: 1.14 | Firmware install program V. 1.10 | |
| Setup Program Version: 1.12 | Log file version 1.11 | Tool box version 1.11 |
FOR AUTOMATIC NOTIFICATION OF UPDATES IN THE MANUAL OR PDA SOFTWARE SUBSCRIBE HERE.
Frequently
asked questions concerning the control board.
If you are using the red board to drive a V-Star compressor Please click here
You may now purchase a PDA from Hydro-Temp with the software package already
installed and tested with the latest software. We offer the Palm III XE which is shown below.
These units are slightly used but fully tested.
Please call for pricing.
For the Palm desktop software we recommend you download the
latest version direct from palm. You may click on any one of the following links
to download the software:
From Palm.com ->
Palm 6.2 and hotsync manager
From Download.com ->
Palm Desktop 6.2 & hotsync mananger
|
The PDA software does not work with the Zire 21
or Zire 22. |
||||||||
|
PDA must use OS 3.5 or later to work with this software / controller. |
||||||||
|
We have tested the following products and know they work
with our equipment:
|
Palm TX
Tungsten
E2
Palm Zire 31
Sony
CLIÉ peg-T6650
Palm
III XE